Jaw crusher is used at a primary or secondary stage crushing. It has a large intake to crush large lump size and produce small lumps

The material is broken between a stationery jaw and swing jaw. Stationery jaw, as the name suggests, remain fix all the time and the swing jaw acts as a pendulum. The material is crushed between the stationery jaw and swing jaw till it gets reduced to the discharge opening at the end.

The hanging swing jaw acts like a pendulum that provides greater shock at the bottom of the jaw. This mechanism overcomes the rubbing problem of stones to the jaw plate and thereby provides longer life to the jaw plate.

Double toggle design, even for the smallest size crusher, distributes the load to different spares and protects them against the possible wear.

The innovative machine design, the skilled craftsmanship and proven manufacturing are ample reasons for its unique performance thereby delivering the best results to the users.

The productivity and functionality of the machine depends largely on the depth and length of the cavity. The proportion of the depth and the length of the cavity is designed in accordance with the intake opening of the machine thereby providing the desired productivity with greater fault resistant functionality

Well designed compression springs provide crushing mechanism that eliminates the knocks and resultant water.

Machine body frame is made of specialized steel plates with adequate thickness and usage of supporting ribs to support the proper functionality with out any breakage.

All assembled parts are molded and acted as a single homogeneous entity as compared to fabrication. Parts made from fabrication process uses several joints to form a complete entity thereby comparatively weak to withstand against different wear and breaking conditions as compared to the molded parts.

Casted Body blocks are well welded with the machine body frame to create a structure full of strength

Jaw plates and side wear plates in the cavity area are made from specialized material- Mn steel, to withstand against possible wear.

Shaft, toggle and pitman is made of quality steel alloys providing seamless functionality, with out the fear of fault or breakage.

Toggle pin and flywheel is made of alloy of Bronze metal to reduce possible wear and provide longer durability

High quality rubber diaphragm provides oil sealing with capacity to withstand against hot oil condition and yet delivering functionality

Proven bearings to provide smooth working